Sony ZS-M30 - Manual (Page 7)

Basic Operations
7 GB
To Press
stop recording MD x or CD x
turn on/off the player OPERATE
If “CD>MD OK?” alternates with time display
There is not enough space on the MD to record the whole CD.
If it is all right to record as much as possible and cancel recording
of some tracks, press YES•ENTER. To stop recording, press
NO•CANCEL.
If any other messages are displayed, see page 51.
YES
ENTER
OPERATE
NO
CANCEL
4
To record at high speed, press HIGH SPEED.
The indicator lights up.
To record at normal speed, skip this step.
5
Press SYNCHRO REC
CD N MD.
The player starts recording
automatically.
If the MD has any previous
recording, recording will be made
from the last recorded position.
Use these buttons for additional
operations
CD x
Notes
• After you
stop
recording, do not
disconnect the mains
lead or move the player
while “TOC EDIT” is
flashing in the display.
If you do so, recording may
not be done properly.
• When you record a whole
CD, you cannot pause
recording.
Tips
• Adjusting the volume or the
audio emphasis (page 34)
will not affect the recording
level. Keep the volume at a
moderate level so as to
prevent the sound from
skipping.
• To record over the previous
recording, see page 24.
• Once the clock is set, the
recording date and time are
stamped automatically
(page 35).
• You can label an MD or a
track during recording
(page 30).
MD x
Track
number
of CD Playing time
of CD