Sony ZS-M30 - Manual (Page 25)

Editing recorded tracks on the MD
25 GB
Editing recorded
tracks on the MD
Before editing
On the MD, track marks are inserted
between the tracks. You can edit recorded
tracks by adding or erasing the track marks.
The position of the track marks to be added
are different depending on the type of
recording or recording conditions as shown
in the following table.
The position of the track marks
to be added
The type of
recording
Recording a whole
CD (page 6)
Recording from a
CD using REC•REC
MODE button (page
22)
Recording from the
radio or other
components connected
to the player (pages 21
and 43)
You can add or erase track marks after
recording. When you record, track marks
may be added to the positions you do not
want. If that happens, change the positions
of the track marks to those you want.
The position of the
track marks to be
added
The same positions on the
source CD
• The same positions on
the source CD
• The position where you
pause recording
• The position where you
press REC•REC MODE
• When there is no sound
input or a soft sound
continues during
recording for more than
2 seconds
• The positions where you
pause recording
• The positions where you
press REC•REC MODE
Erasing recordings
(Erase Function)
You can quickly erase the recorded tracks or
unnecessary portion in the track. Unlike a
cassette-corder, blank portion will not
remain after erasure.
Here are three options to erase recordings:
• Erasing a single track
• Erasing all tracks on an MD
• Erasing a portion of a track
EDIT
YES
ENTER
NO
CANCEL
MD x
Erasing a single track
You can erase a whole track quickly. When
you erase a track, the total number of tracks
on the MD decreases by one and all tracks
following the erased one are renumbered.
1
Play the track you want to erase.
2
Press EDIT repeatedly until “Track
Erase” appears in the display.
continued