Sony ZS-M30 - Manual (Page 16)

16 GB
(In case of MD)
3
Press CD u ( or MD u) to start
programme play.
On the remote
Press MODE until “PGM” appears in the display,
then press the number/character button to select
the track.
Tips
• If you made a mistake, press NO•CANCEL and
re-enter the track number using the jog dial and
YES•ENTER.
• If the programme play is finished, the
programme is saved. You can play the same
programme again by pressing u.
• If you open the lid of the CD compartment, the
programme is erased.
• If you take out the MD, the programme is
erased.
• During play, total programmed time cannot be
displayed.
Track number
Total programmed
time
Playing order
To cancel Programme Play
Stop playing first. Then, press MODE until
“PGM” disappears from the display.
To check the order of tracks
before play
Before starting the programme play, press
YES•ENTER.
Every time you press YES•ENTER, the
track number appears in the programmed
order.
To change the current
programme
Change before starting the programme play.
To
erase the last track
in the programme
change the whole
programme
completely
Do this
1 Press NO•CANCEL.
The track programmed
last is erased.
2 Re-enter the track
numbers by turning the
jog dial and pressing
YES•ENTER.
1 Press x to erase the
whole programme.
2 Create a new programme
following the
programming procedure.
Creating your own programme
(Programme Play) (continued)