Smeg WO-01 - Manual (Page 4)

- 30 -
1. General warnings
STORAGE:
THE PACKED APPLIANCE MUST BE STORED IN A DRY, CONDENSATION-FREE AREA,
UNDER COVER. THE ADMITTED STORAGE TEMPERATURE IS 4-50°C.
ALWAYS DISCONNECT ELECTRICAL POWER BEFORE WORKING ON THE APPLIANCE OR
DISASSEMBLING IT.
POSITIONING, HOOKUP, COMMISSIONING, TROUBLESHOOTING AND REPLACING POWER
CABLES MUST ALWAYS BE DONE BY QUALIFIED PERSONS.
CHANGES IN THE POWER VOLTAGE OF MORE THAN 10% OF THE RATED VALUE CAN
DAMAGE THE ELECTRICAL CIRCUITS; MONITOR THE MAINS VOLTAGE CONSTANTLY.
THE APPLIANCE MUST BE GROUNDED AS REQUIRED BY ELECTRICAL EQUIPMENT
SAFETY STANDARDS.
THIS UNIT IS INTENDED ONLY FOR THE INTENDED PURPOSE OF TREATING WATER FOR
TECHNICAL PURPOSES.
SHIPPING/DELIVERY:
THERE ARE NO SPECIAL PRECAUTIONS FOR UNPACKING THE APPLIANCE, EXCEPT FOR
THE NORMAL CARE REQUIRED IN HANDLING FRAGILE MATERIALS. BEFORE DISPOSING
OF THE PACKAGING, MAKE SURE IT DOES NOT CONTAIN ANY PARTS, INSTRUCTION
BOOKLET OR OTHER DOCUMENTATION.
THE PACKAGING (CARDBOARD, EXPANDED POLYSTYRENE, PALLET, ETC.) MUST NOT BE
LEFT WITHIN THE REACH OF CHILDREN, SINCE THEY ARE HAZARDOUS MATERIALS.
THE OSMOSIS TREATMENT UNIT MAY BE REMOVED FROM ITS ORIGINAL POSITION ONLY
BY SPECIALISED PERSONS.
WHEN CLEANING THE APPLIANCE DO NOT USE CORROSIVE PRODUCTS, ACIDS, STEEL
PADS OR BRUSHES.
DO NOT WASH THE APPLIANCE WITH DIRECT OR HIGH PRESSURE JETS OF WATER.
THE MANUFACTURER DECLINES ALL LIABILITY FOR INJURY/DAMAGE TO PERSONS OR
PROPERTY CAUSED BY NON-OBSERVANCE OF THE INSTRUCTIONS GIVEN IN THIS
MANUAL, INCORRECT USE, TAMPERING BY UNQUALIFIED PERSONS, TAMPERING WITH
EVEN ONE PART OF THE APPLIANCE, OR THE USE OF NON-ORIGINAL SPARE PARTS, OR
MODIFICATIONS, ACCESSORIES OR DEVICES OF ANY KIND APPLIED TO THE APPLIANCE
UNLESS EXPRESSLY SPECIFIED IN THIS MANUAL.