Sub-Zero Steamer Module - Manual (Page 21)

21
W O L F T R O U B L E S H O OT I N G G U I D E
T R O U B L E S H O OT I N G G U I D E
P R O B L E M P R O B A B L E C A U S E C O R R E C T I O N
Nothing works Steamer module is not Have electrician verify that
connected to proper electrical proper voltage is being applied
circuit. to steamer module.
Fuse is blown or circuit Have electrician replace fuse or
breaker is tripped. reset circuit breaker.
No electricity supplied to Have electrician check house
steamer module. power supply.
Steamer module is in Unlock the control panel
Lock mode. (see page 8).
”Lo” appears in Steamer module was started Follow instructions for Water
temperature display with no water. Level Safety Feature on page 11.
Steamer basin water level Follow instructions for Water
is too low. Level Safety Feature on page 11.
Dimensions in parentheses are in
millimeters unless otherwise specified.