Samsung SNS-100/400 - Manual (Page 14)

SNS-100/400 Network Server
12
Ch3. Installation and Setting
3.1. Power Input
„ DC Power
Only DC12V power may be supplied to this product.
When using an adapter different from the one supplied by us (DC12V/4A), make sure that it is DC12V/2A or higher.
„ DC Only
For SNS-400, the recommended adapter specs are DC12V/2A, therefore, only use standard adapters.
Chart 3-1 When the copper wire’s resistance is [20℃(68℉)]
Copper Wire Size (AWG) #24(0.22㎟) #22(0.33㎟) #20(0.52㎟) #18(0.83㎟)
Resistance (Ω/m) 0.078 0.050 0.030 0.018
DROP Voltage(V/m) 0.028 0.018 0.011 0.06
y As seen in Chart 3-1, a voltage drop occurs and thus, in the case that the adapter output wire’s length is excessively connected
to the network, a problem can occur with the network server.
※ Server Operation Voltage: DC 12V±10%
※ Depending on the type and manufacturer of the voltage load wire described in the above chart, there may be a deviation.
3.2. Connecting to Monitor
Connect the video output terminal on the back of the product to the monitor input terminal.
SNS-100 Network Server Monitor
y Connection methods may differ depending on the used monitor and peripheral devices, so please refer to the users’ manual.
y Always connect after turning the device’s power off.