Samsung SNS-100/400 - Manual (Page 22)

SNS-100/400 Network Server
20
Screen where
Deinterlace is
not applied Screen where
Deinterlace is
applied
Note
Deinterlace is a function to adjust the video quality softly by eliminating the border line which was made by an
interlace function. The interlace function draws an even line and an odd line of the Image one after the other.
Camera Setup
Pop up button for adjusting camera OSD.
Camera OSD
control button
is displayed
Camera OSD is
displayed
Instruction for Camera OSD control button
<↑>, <↓> button
Moves selection displaying arrows up and down on camera OSD menu.
<←>, <→> button
Changes configuration of selected field on camera OSD menu.
<Set> button
Used when moving to a selected field’s lower menu or when setting a selected item.
<Exit> button
Used when going to the upper menu of a selected field or when terminating OSD.
Caution
Camera can be controlled only when connected to the RS-485’s configuration communication terminal.
Note For camera configurations and configurations, please see the ‘Camera Manual’.