Samsung SNS-100/400 - Manual (Page 25)

4.2. Using Administration Page
23
Item Description
no amplifying function. (In case of Line-In signal, configure Low)
Product Information
Item Description
Model Displays model name of the network server.
Mac Address Displays MAC Address of the network server.
Camera Name Configures name of the network server and it helps to classify several network servers.
Channel 1 Name
Network server’s channel name can be set and when it is 4 channels, there are up Channel 1, 2, 3 and 4
names.
Location Enters the place where the network server is installed.
Description Enters the description for the network server and the related section.
Memo Enters the contact information for the network server administrator.
4.2.4. Network
Configures the network data of the network server.
Network Configuration
According to the user’s network environment, it is classified as LAN, xDSL or DHCP.
Item Description
LAN
In case the network server is connected to the local network or xDSL with a static IP address, configure
network information to be assigned to the network server.
xDSL In case of xDSL with a dynamic IP address, enter password in User Name and Password field.
DHCP This case is selected in case of using IP sharing box/ cable modem.
Port/DDNS Configuration
Item Description
Connection Port Port used for controlling communication with network server. (Default : 4000)
HTTP Port/FTP Port Port used for connecting to network server’s webpage and FTP functions. (Default : http=80, ftp=21)
Use DDNS
Choose whether you use DDNS server.
IP address for dynamic IP can continuously change, but if you use DDNS, you can connect to the server
regardless of the changing IP address.