Sanyo VA-SW8000 - Manual (Page 100)

99 English
DVR Management Menu
(Required user access level: ID4)
1 USED TIME
Indicates the total operating hours of each
hard disk as well as the total power-on
hours of the DVR.
2 POWER LOSS
Indicates when the most recent power
failure occurred and when it was recovered
as well as the total cumulative number of
power failures.
3 FIRMWARE VERSION
Indicates the version of the DVR’s firmware
(main/sub).
4 RECORDING TOP/END
Indicates when the first recording session
started and when the last recording
session stopped.
INFORMATION 2 tab
1
2
3
4
No firmware version is indicated if
the DVR is DSR-M800 (P).
This information is displayed only if
the DVR is DSR-M810 (P)/M814 (P).