Sanyo VA-SW8000 - Manual (Page 115)

English 114
DVR Management Menu
(Required user access level: ID4)
On this tab, you can control which items should be displayed on the DVR’s user interface and when
the warning buzzer should sound.
<DISPLAY>
Specify which items should be displayed on
the DVR’s user interface by selecting either
the ON or OFF radio button for each item.
1 DATE/TIME (default: ON)
Current date/time for live video; or the date/
time of recording for recorded video.
2 QUALITY/AUDIO (default: ON)
Quality and audio settings.
(Marked with “A” if [AUDIO RECORDING]
is set to “ON”.)
3 ALARM COUNT (default: ON):
Number of alarm events.
(The system counts up to 99,999 alarm
events; after the maximum is reached, the
count is reset to 0.)
4 CAMERA TITLE (default: ON)
Depending on whether the connected
DVRs are single-channel or 4-channel,
either camera titles or DVR names are
displayed as follows:
DSR-M804/M814: camera titles
DSR-M800/M810: DVR names
5 DISPLAY/BUZZER SET Tab
1
2
3
4
5
6
7
8
9
The camera titles displayed are those
configured on the TITLE MOTION SET
tab, rather than those configured on the
[Tree Edit] window under the Initial Set
menu.