Sanyo VA-SW8000 - Manual (Page 82)

81 English
Initial Set Menu
(Required user access level: ID4)
b [Register DVR] window
(accessible on the master computer only)
The [Register DVR] window, accessible on the master computer only, allows you to register or
delete DVRs connected to the monitoring network.
Slave computers contact the master computer to obtain the DVR registration information.
● Window Elements and Their Functions
• Before you can use the DVR Utility Software, you must register DVRs connected to the network.
When you start up the master computer for the first time, be sure to perform this initial
configuration task.
• The [Register DVR] window displays the tree list and groups intended exclusively for DVR
registration and management purposes. When you edit the tree list and groups actually
displayed on the user interface, you must use the [Tree Edit] window, rather than the [Register
DVR] window. For more information, see P76.
• By default, the DVR Utility Software supports up to 1,000 DVRs connected to the network. If you
want to connect more DVRs to the network, you can use the [Options] window to activate the
network extension mode, in which you can connect up to 4,000 DVRs. For more information,
see P75.
• When you are done, click [OK]. Your changes are saved, and the configuration data is uploaded
to the DVRs.
When you make changes and attempt to switch to another window without clicking the [OK]
button, a confirmation dialog appears. Choose whether to apply the changes by clicking the
appropriate button on the confirmation dialog.
4
1
3 2
5
6
7