Sanyo VA-SW8000 - Manual (Page 40)

39 English
Recording Monitored Video
b Timer recording (required user access level: ID3/4)
Timer recording allows you to schedule the automatic recording of live video.
1 Set up the timer.
It is prerequisite that a user with user
access level ID4 should configure the
timer operating conditions using the
TIMER REC SET tab of the [DVR Set]
window. For more information, see P110.
2 Click (timer button) on the control
panel.
The timer is activated and the live video
will be automatically recorded at the
scheduled time.
3 To cancel timer recording:
You can cancel scheduled or ongoing
timer recording by clicking again
on
the control panel.
The
C
and
D
symbols disappear and
timer recording is canceled.
A
C
symbol is displayed in the title bar
when timer recording is on standby.
When timer recording starts, a
D
symbol appears next to the symbol
mentioned above.
If the [ALARM MODE] is set to “OLY
AL-REC ON TMR” on the REC MODE
SET tab of the [DVR Set] screen, alarm
recording is automatically triggered
when the timer-scheduled time is
reached, so you do not have to click the
timer button.
The broadcast feature allows you to simultaneously turn all the DVRs on or off according to
the timer mechanism. For more information, see P70.
• After you have finished manual or timer recording, you must wait for up to 10 seconds to start
a new recording session.
• After you have changed the DVR’s [PICTURE QUALITY] or [AUDIO RECORDING] setting, you
must wait for up to 6 seconds to start a new manual or timer recording session.