Sony VGC-LT30 Series User Manual
Page 124
Upgrading Your VAIO Computer
8
Remove the new memory module from its packaging.
9
Slide the memory module into the memory module slot and push it in until it clicks into place.
!
Do not touch any other components on the motherboard.
Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open
slot.
10 Replace the memory module compartment cover and tighten the screw.
11 Connect the AC adapter and the peripheral devices that you disconnected in step 3.
12 Replace the back panel cover.
See Removing and Replacing the Back Panel Cover
for the procedure.
13 Plug the computer to the power source and connect the rest of the peripheral devices.
14 Turn on all peripheral devices and then the computer.