Connecting the wireless mouse – Sony VGC-LT30 Series User Manual
Page 28
28
Getting Started
Connecting the Wireless Mouse
A wireless mouse and two AA alkaline batteries for use in the mouse are supplied with your computer. Before attempting to
use the wireless mouse, you must install the batteries and establish communication between your computer and the mouse.
✍
If you find your mouse not working, for example after replacement of the mouse batteries, try the following steps for reconnection.
To connect the wireless mouse
!
To connect the wireless mouse, it must be located within a range of approximately 11.8 inches (30 cm) to approximately 39.4 inches (1 m) from the
computer.
1
Insert the supplied two AA batteries into the wireless mouse as shown below:
2
Remove the back panel cover from the computer.
See Removing and Replacing the Back Panel Cover
for the procedure.
3
Turn on the computer.