Why can't i use the built-in motion eye camera – Sony VGC-LT30 Series User Manual
Page 157
Troubleshooting
Why can't I use the built-in MOTION EYE camera?
❑ The built-in MOTION EYE camera cannot be shared by more than one software application. If another software
application is using the camera, exit the application before using the built-in MOTION EYE camera.
❑ If the problem persists, you must reinstall the driver software for the camera. Follow these steps:
1
Click Start, Control Panel, Hardware and Sound, and Device Manager.
2
Double-click Imaging devices.
3
Right-click the device name for your camera and click Update Driver Software.
What should I do if my computer becomes unstable when it enters a power saving mode
while the built-in MOTION EYE camera is in use?
❑ Do not place your computer into Sleep mode while you are using the built-in MOTION EYE camera.
❑ If your computer automatically enters Sleep mode, change the corresponding power saving mode setting. For changing
the setting, see Using the Power Saving Mode