Sony VGC-LT30 Series - Manual (Page 63)

63 n N
Using Your VAIO Computer
To connect in land-based (terrestrial) broadcasting mode (Option 2)
1 Connect one end of a 300-ohm twin lead cable (1) (not supplied) to the screw-type grips at your antenna outlet (2).
Connect the other end to the grips on a VHF/UHF RF combiner/transformer (3) (not supplied).
2 Connect a coaxial cable feed connector (4) (not supplied) to the VHF/UHF RF combiner/transformer (3).
3 Connect one end of the TV coaxial cable (5) (supplied) to the feed connector (4). Connect the other end to the VHF/UHF
input port (6) on the computer.