Sony VGC-LT30 Series User Manual
Page 67
67
Using Your VAIO Computer
To connect in STB mode (Option 2)
1
Connect one end of a TV coaxial cable (1) (supplied) to your cable service access (wall outlet) (2). Connect the other end
to the VHF/UHF IN port on the back panel of your set-top box (STB) (3).
2
Connect a second TV coaxial cable (4) (not supplied) to the VHF/UHF OUT port on the set-top box (STB) (3). Connect
the other end to the VHF/UHF input port (5) on the rear of your TV monitor or display.
3
Connect one end of a stereo A/V cable with triple RCA plugs (6) (not supplied) to the Composite Audio Out (L/R) jacks
(7) and the Video Out jack (8) on the back panel of your set-top box (STB) (3), matching the plug and jack colors. Connect
the other end to the A/V INPUT jack (9) on the computer.
4
If you prefer better video quality, connect one end of an S Video cable (10) (not supplied) to the S Video Out port (11) on
the back panel of the set-top box (STB) (3). Connect the other end to the S VIDEO input port (12) on the computer.