Connecting to a network (lan) – Sony VGC-LT30 Series User Manual
Page 107
Advertising
Using Peripheral Devices
Connecting to a Network (LAN)
You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T-type networks with an Ethernet network cable.
Connect one end of a network cable (not supplied) to the network (Ethernet) port on the back of the computer and the other
end to your network. For detailed settings and devices needed to connect to the network, ask your network administrator.
✍
You need to remove the back panel cover from the computer to access the network (Ethernet) port. See Removing and Replacing the Back Panel
Cover
for the procedure.
✍
Your computer can be connected to the network with the default settings.
Advertising