Sony D-VE7000S - Manual (Page 43)

Setting the Audio Output
( AUDIO SETUP)
Items Options (  : Default settings)
DOWNMIX Use this function to create stereo (2-channel) signals from Dolby Digital sources
recorded on DVDs. This setting affects the outputs of the AUDIO jack.
 Dolby
Surround
Select this when the connected audio component supports
Dolby Surround (Pro Logic).
NORMAL Select this when the connected audio component does not
support Dolby Surround (Pro Logic).
DIGITAL OUT
SETUP You can set the mode of the digital signals output from the OPTICAL OUT jack.
 Dolby Digital Dolby Digital Select this when connecting an audio
component with a built-in Dolby Digital
decoder.
 DOWNMIX
PCM
Select this when connecting an audio
component without a built-in Dolby Digital
decoder.
DTS DTS Select this when connecting an audio
component with a built-in DTS decoder.
 PCM Select this when connecting an audio
component without a built-in DTS decoder.
48kHz/96kHz
PCM  48kHz Select this when the PCM signal is output at
48 kHz.
96kHz Select this when the PCM signal is output at
96 kHz.
AUDIO DRC Makes the sound clear when the volume is turned down when playing a DVD that
conforms to “Audio DRC” (Dynamic Range Control). (Thanks to the dynamic
range compression, the volume of quiet sound is maintained.) Select the level to
your convenience. This setting affects the outputs of the AUDIO jack.
 STANDARD No DRC effects.
WIDE
RANGE
Produces powerful sound. More effective with high quality
speakers.
n, make
TV with a
de picture
screen
de picture
nd the
make this
ends on
43
Setup
D-VE7000S.US.2-683-363-11(1)
Continued 