Sony HDW-D2000 - Manual (Page 111)

Chapter 10
Setup Menus
10-14
Chapter 10 Setup Menus
10-4 Items in the Extended Setup Menu
Menu items in the range 200 to 299, relating to the remote control interface (Continued)
Menu items in the range 300 to 399, relating to editing operations
Item number Item name Settings
301 VAR SPEED RANGE FOR
SYNCHRONIZATION Select the playback speed range when carrying out playback in variable speed
mode from a remote control unit connected to the REMOTE-1 IN(9P) connector
or REMOTE-1 OUT (9P) connector.
–1 ˜ +2 : –1 to +2 times normal speed for HDCAM tapes. –1 to +3 times normal
speed for Digital Betacam, MPEG IMX tapes.
˜2.45 : –1.5 to +2.45 times normal speed for HDCAM tapes. –1.5 to +3.45 times
normal speed for Digital Betacam and MPEG IMX tapes.
302 CAPSTAN RE-LOCKING
DIRECTION
(Invalid in 24PsF or
23.98PsF mode) In 59.94i, 29.97PsF mode
When the function menu item CAPSTN is set to 4F, select whether the capstan
servo should lock by accelerating or decelerating.
DECEL : Lock by decelerating.
ACCEL: Lock by accelerating.
In 50i, 25PsF mode
When the function menu item CAPSTN is set to 4F or 8F, select whether the
capstan servo should lock by accelerating or decelerating.
DECEL: Lock by decelerating.
ACCEL : Lock by accelerating.
304 EDIT FIELD SELECT Select with which fields to start and end editing using tape.
1F : Start editing with field 1 and end with field 2.
2F: Start editing with field 2 and end with field 1.
1F/2F: Start and end editing depending on the timing of command reception.
Note
The setting is always 1F in the following cases.
• In PsF mode
• When SDTI (option) is selected
Item number Item name Settings
212 VIDEO REMOTE
CONTROL SELECT
(Invalid in 24PsF or
23.98PsF mode) Make settings for control from HKDV-900/503 via the VIDEO CONTROL (15P)
connector.
Sub-item
1 IMAGE
ENHANCER Select whether to control the up-converter or down-converter when controlling the
image enhancer.
down : Control the down-converter.
up: Control the up-converter.
u&d : Control both the up-converter and down-converter.
2 D2 SETUP Select the menu item to be controlled by the SETUP dial on the HKDV-900/503
with the D2 button pressed.
setup : Sub-item (OUTPUT LEVEL) of menu item 713 (VIDEO SETUP
REFERENCE LEVEL)
Black : Menu item 718 (SETUP LEVEL)
For details, see the description of menu item 718.
Note
After changing the setting for this item, power off this unit or HKDV-900/503 and
power it on again.
305 SYNC GRADE When editing in phase-synchronized mode with menu item 004 set to ON, select
the target phase synchronization accuracy.
ACCUR : ±0 frame accuracy
ROUGH: ±1 frame accuracy
(Continued)