Sony HDW-D2000 - Manual (Page 113)

Chapter 10
Setup Menus
10-16
Chapter 10 Setup Menus
10-4 Items in the Extended Setup Menu
Item number Item name Settings
Menu items in the range 300 to 399, relating to editing operations (Continued)
311 ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH1 When using an editor (PVE-500, BVE-600, etc.) or a remote controller which
cannot control digital audio edit preset, select how to activate edit preset of each
digital audio channel (channels 1 to 4, and CUE) on this unit using the analog
audio edit preset function of the editor or remote controller.
Set edit preset of each digital audio channel (channels 1 to 4 and CUE) on this
unit on or off according to the analog audio preset specified by the remote
controller or editor.
NODEF: No definition.
CH1: Follow edit preset of analog channel 1.
CH2: Follow edit preset of analog channel 2.
CH1+2: Follow edit preset of analog channel 1 or 2.
The default settings for each item are as follows:
311 : CH1
312 : CH2
313 : NODEF
314 : NODEF
315 : NODEF
312 ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH2
313 ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH3
314 ANALOG AUDIO EDIT
PRESET REPLACE FOR
CH4
315 ANALOG AUDIO EDIT
PRESET REPLACE FOR
CUE
318 EDIT RETRY For two-VTR editing, set when this unit is used as the recorder. Selects the
operation if the recorder was not synchronized in time.
OFF: Editing is not carried out, and the unit stops.
ON : The editing is automatically retried (up to twice).
319 PREREAD SELECT Specify the preread operation.
A/V : Preread for both audio and video.
AUDIO: Preread for audio only.
VIDEO: Preread for video only.
The preread operation is enabled when the function menu item PREREAD is set
to ON or with a command from the 9-pin remote control interface.
326 AUTOMATIC IN ENTRY
AFTER AUTO EDIT Select whether or not to automatically set the OUT point of the previous edit as
the next IN point at the end of an automatic edit.
OFF : No automatic setting
R: Set recorder IN point automatically.
R & P: Set recorder IN point automatically, and also player IN point in two-VTR
editing.
317 AUDIO EDIT MODE Select the type of audio transition used for digital audio editing.
CUT: Cut editing (audio discontinuity at transition point, and possible noise during
playback).
CROSS : Cross-fade
FI/FO: Fade in and out
t: Time set by item 803 DIGITAL AUDIO FADE TIME
IN/OUT
t
IN/OUT
t
(Continued)