Sony HDW-D2000 - Manual (Page 143)

Appendix
Appendix
A-7
HD/SD video output phase settings
For the HD/SD video output phase setting, you can
use the maintenance menu.
For details, refer to the Installation Manual.
Note
The SD SDI (D1) output and component/composite
outputs have the same phase.
For details of the audio/timecode output phase, see Setup
menu item 338.
Item number Item name Settings
M3 M3A:
OUTPUT
PHASE
SELECT M3A0:
HD PHASE
SEL Select the HD video output signal phase with respect to the reference signal: 0H
or –90H (HD) advanced.
0H : Output in sync with the reference signal.
–90H: Output with the phase delayed by –90H (HD) with respect to the reference
signal.
M3A1:
SD PHASE
SEL Select the SD video output signal phase with respect to the reference signal: 0H
or –2H (SD) advanced.
0H : Output in sync with the reference signal.
–2H: Output with the phase delayed by –2H (SD) with respect to the reference
signal.
M3A2:
SD UPCNV
SEL Select whether the SD video output signal phase in SD tape playback should be
in sync or one frame delayed.
Noml : Output the SD video with the phase unchanged. (The HD video output is
delayed by one frame with respect to the reference signal.)
HD: Output the SD video with the phase delayed by one frame. (The HD video
output and SD video output are in sync with the reference signal.)