Sony HDW-D2000 - Manual (Page 129)

Chapter 10
Setup Menus
10-32
Chapter 10 Setup Menus
10-4 Items in the Extended Setup Menu
Item number Item name Settings
Menu items in the range 900 to 999, relating to digital processing (continued)
936 LIMITER (DC)
(Invalid in 24PsF or
23.98PsF mode) Carry out the down-converter image enhancer adjustment.
Adjust the maximum detail level added to emphasize the original signal.
0 to 20H to 3FH
935 DETAIL GAIN (DC)
(Invalid in 24PsF or
23.98PsF mode) Carry out the down-converter image enhancer adjustment. Adjust the sharpness
of edge emphasis.
0 to 20H to 7FH
937 CRISP THRESHOLD (DC)
(Invalid in 24PsF or
23.98PsF mode) Carry out the down-converter image enhancer adjustment. Set the threshold
amplitude at which low amplitude signals are not emphasized.
0 to FH
938 LEVEL DEPEND
THRESHOLD (DC)
(Invalid in 24PsF or
23.98PsF mode) Carry out the down-converter image enhancer adjustment. Set the luminance
range for edge enhancement.
0 to 8 to FH
939 H DETAIL FREQUENCY
(DC)
(Invalid in 24PsF or
23.98PsF mode) Carry out the down-converter image enhancer adjustment. Set the central
frequency for edge enhancement.
2.6MHz to 3.4MHz to 3.9MHz to 4.6MHz
940 H/V RATIO (DC)
(Invalid in 24PsF or
23.98PsF mode) Carry out the down-converter image enhancer adjustment. Set the horizontal/
vertical ratio for edge enhancement.
0 to 3 to 7
941 GAMMA LEVEL (DC)
(Invalid in 24PsF or
23.98PsF mode) Carry out the down-converter image enhancer adjustment. Adjust the slope of the
correction curve.
0 to 80H to 100H
942 V FILTER SELECT
(Invalid in 24PsF or
23.98PsF mode) Set the vertical interpolation filter coefficient for HD-SD converter output.
The vertical resolution increases as the setting grows larger.
1 to 3
943 CROSS COLOR CRISP
(Invalid in 24PsF or
23.98PsF mode) Set the cross color crisp level for HD-SD converter output.
0 to 4 to FH
950 UP CONVERTER MODE
(Invalid in 24PsF or
23.98PsF mode) Select the up-converter mode.
crop : Select the edge-crop mode.
l-box: Select the letter box mode.
squez: Select the squeeze mode.
951 H CROP POSITION
(Invalid in 24PsF or
23.98PsF mode) Adjust the “H-crop” (the horizontal position when inserting in the edge crop mode)
of the up/down converter output when menu item 950 is set to crop.
–120 to 0 to 120
952 LETTER BOX POSITION
(UC)
(Invalid in 24PsF or
23.98PsF mode) Adjust the vertical position of the letter box mode cutout in up-converter output
when l-box is selected in menu item 950.
–120 to 0 to 120
953 UP CONVERTER
PROCESS SELECT
(Invalid in 24PsF or
23.98PsF mode) Select the original picture to use when converting SD to HD.
FIELD: Use field picture.
FRAME: Use frame picture.
adapt (standard mode): Set the ratio of converting from frames or fields to the
standard ratio when up-converting.
adap2 (still picture priority mode): Set the ratio of converting from frames
higher when up-converting.
adap3 (motion priority mode): Set the ratio of converting from fields higher
when up-converting.
954 DETAIL GAIN (UC)
(Invalid in 24PsF or
23.98PsF mode) Carry out the up-converter image enhancer adjustment. Adjust the sharpness of
edge emphasis.
0 to 40H to 7FH
(Continued)