Sonic Blue Replay TV 5000 - Manual (Page 14)

8
ReplayTV 5000
Serial cable (included) lets ReplayTV change the channels on satellite receivers, many if which use serial
cables for communication. The RJ-11 to 9-pin adapter connects to this cable, if it is used.
IR blaster cable (included) lets ReplayTV change the channels on your cable box or satellite receiver if it does
not support the serial cable. The IR blaster emitters need to be affixed directly over the IR detector on your sat-
ellite receiver or cable box. See “Connecting the IR Blaster” on page 10.
9-pin to 15-pin adapter (included) connects your satellite receiver to ReplayTV if the satellite receiver uses a
15-pin serial cable.
RJ-11 to 9-pin adapter (included) connects your satellite receiver to ReplayTV if the satellite receiver uses a
telephone cable in place of a serial cable. RCA models DRD221RD, DRD222RD, DRD223RD, and DS2122RD
all require use of this adapter.
Ethernet cable (not included) connects to the ETHERNET jack on ReplayTV, allowing you to connect
ReplayTV to a broadband network. If you have a home network, you should leave ReplayTV connected to it at
all times, because ReplayTV will use it to receive Channel Guide listings.
Telephone cable (included) connects from the TEL LINE jack on ReplayTV to a wall jack. Leave the cable
connected to ReplayTV at all times to receive the daily Channel Guide listings.