Summit HP P4045 User Manual
Page 17
30. Unlike the HP-4300 series where there are three separate
mixing blades in the toner hopper. These cartridges just use
one large mixing blade inside the toner hopper.
31. The upper mag. roller section of the toner hopper is differ-
ent in that is “Floats” on a series of foam seals. The upper half
can be removed from the hopper, but some of the seals will be
destroyed. This may become necessary in order to seal the car-
tridge we will keep you informed as our testing continues. The
foam isolates the mag roller from the vibrations of the mixing
augers, and allows smoother prints.
32. Install the doctor blade and two screws. Make sure that
the clear strips are not damaged!
33. Install the MRS assembly. Make sure the clear strips from the DB ride on top of the magnetic roller.
UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
HP P4014, P4015 & P4045 CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Los Angeles, California 90250 USA
•
Ph +1 310 280 9620
•
Fx +1 310 838 7294
•
•
www.
uninet
imaging.com
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SU
MM
IT