Summit HP P4045 User Manual
Page 18
34. Remove the right side small bushing from the magnetic
roller sleeve and install it onto the holder. Make sure the tab
on the bushing aligns with the slot in the holder.
35. Install the holder 2 screws and spring. Make sure the screw holes line up, and that the two locking tabs on the bottom of the
holder are in the correct place.
UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
HP P4014, P4015 & P4045 CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Los Angeles, California 90250 USA
•
Ph +1 310 280 9620
•
Fx +1 310 838 7294
•
•
www.
uninet
imaging.com
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SU
MM
IT