Summit HP P4045 User Manual
Page 9
1. Place the cartridge with the toner hopper facing up and
towards you. This will orient the cartridge for right and left
sides.
2. Open the drum cover towards the back of the cartridge.
Remove the right side metal bar.
3. On the opposite side of the cartridge, carefully pry off the
drum cover plastic arm. The spring will probably pop off, take
care not to loose it. We will go over the installation at the end
of this article. Remove the drum cover assembly.
4. Remove the metal bar from the left side, and remove the
entire drum cover assembly. Make sure you put the spring in a
safe place.
5. Remove the five screws on the right side end cap.
UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
HP P4014, P4015 & P4045 CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Los Angeles, California 90250 USA
•
Ph +1 310 280 9620
•
Fx +1 310 838 7294
•
•
www.
uninet
imaging.com
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SU
MM
IT