Summit HP P4045 User Manual
Page 22
UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGE
UNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
HP P4014, P4015 & P4045 CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Los Angeles, California 90250 USA
•
Ph +1 310 280 9620
•
Fx +1 310 838 7294
•
•
www.
uninet
imaging.com
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SU
MM
IT
RUNNING THE CLEANING PAGE
1. Press “MENU” on the control panel.
2. Press the down arrow until “CONFIGURE DEVICE” shows on the display.
3. Press the down arrow until “PRINT QUALITY” shows on the display.
4. Press the down arrow until “CREATE CLEANING PAGE” shows on the display.
5. Press OK.
5. Remove all the paper from tray 1.
6. Remove the cleaning page from the output bin and load it face down in tray 1.
7. Press the down arrow until “PROCESS CLEANING PAGE” appears on the display.
8. Press OK.
RUNNING TEST PAGES
1. Press “MENU” on the control panel
2. Press the down arrow until “INFORMATION” shows on the display
3. Press the down arrow until either:
PRINT MENU MAP
PRINT CONFIGURATION
PRINT SUPPLIES STATUS PAGE
PRINT USAGE PAGE
PRINT PCL FONT LIST or
PRINT PS FONT LIST appears on the display
4. Choose the page(s) desired.
PRINTER ERROR CODES
Most of the error codes are self explanatory but there are a few that are part text, and part number.
It is those codes that we will list here.
10.10.00 Supply Memory Error:
Bad chip
10. XX.YY Supply Memory Error:
An error has occurred in one or more of the printers supplies.
XXOO = Memory is defective
XX01 = Memory is missing
YY00= Bad cartridge
Error 10.94.YY:
Remove the shipping locks from the cartridge. Remove the shipping lock(s).
Error 41.X:
This code is a Temporary Printer error.
Error 50.X:
This code is a Fuser error.
50.1 Low Fuser Temperature
50.2 Fuser warm up slow
50.3 High Fuser Temperature
50.4 Faulty Fuser
Error 51.X:
This code is a laser/scanner error
Error 53.XY.ZZ:
This code is a Printer Memory error.
Error 54.XX:
This code is a typically a sensor issue.