Southwestern Bell FM2560 - Manual (Page 11)

20 21
Caller ID Erase
NOTE: The handset must be in the base to review Caller ID
information.
To Erase a Single Call
1. Press the REVIEW s or t Button to review the Caller ID records
you received.
2. Press ERASE Button
to erase the call
displayed; the LCD will
show "ERASE?".
3. Press ERASE Button
again; the call information will
be erased and the LCD will display the next call message.
NOTE: The handset must be in the base to review Caller ID
information.
Erase All Calls
1. Review all Caller ID records received before erasing all calls.
2. While the display is in the
standby mode, press and hold
the ERASE Button for 2
seconds. The LCD will show:
"ERASE ALL?".
3. Press the ERASE Button
again, ALL VIEWED
messages will be erased.
Caller ID Features
4. 10 digits with a 1 prefix: Simply review to the desired Long
Distance 10 digit call you wish to dial out. Press down the REDIAL
Button once and release. If your area requires that you add 1 and your
area code even if the call is within the same area code, then you must
reprogram your FM2560 to another 3 digit "fictitious" area code. The
"1" prefix will be added before the 10 digit number and your long
distance call will be dialed out.
NEW
CALL AM
CALL
AM
Caller ID Features
NOTE:
1. If there are messages that have not been reviewed, the "Erase All
Calls" function cannot be performed.
2. VIP (priority) calls will not be erased when you erase all calls. See
VIP CALLS section for details.
If you have priority calls in memory, the display will show "CALL
XX" when all other calls have been erased.
VIP (Priority) Calls
The FM2560 allows you to
create VIP (priority) call
records. When a VIP (priority)
call is received, the new call
LED will flash 4 times each
time the phone rings, to alert
you this is a VIP (priority) call.
NOTE: When the incoming VIP call is a call waiting Caller ID
call, NEW CALL LED will flash 4 times every 6 seconds until the call
information disappears.
To Create a VIP Call:
NOTE: The handset must be in the base to review Caller ID
information.
1. Press the REVIEW s or t
Button to view the caller ID
information you received.
2. Press and hold REDIAL
Button for 2 seconds until the
VIP icon is displayed.
To Remove a VIP Call:
1. Press the REVIEW s or t
Button to display the call you
have marked "VIP".
2. Press and hold REDIAL
Button for 2 seconds. The VIP
icon will disappear.
V I P V I P
NEW
CALL AM
V I P V I P
NEW
CALL AM
NEW
CALL AM