Sony SE366 - Manual (Page 26)

26
The user interface
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
The user interface
Once you have configured the network settings on a PC in your local network, you can
then use that PC to configure the Gigaset SE366 WLAN with the aid of the Gigaset SE366
WLAN's user interface. You can use any browser for the configuration; the
recommended products are Microsoft Internet Explorer 6.0 or higher and Mozilla Firefox
1.0 or higher.
Launching the user interface
To access the Gigaset SE366 WLAN's user interface:
ì
Launch your Web browser.
ì
Enter the IP address of the Gigaset SE366 WLAN in the browser's address field.
http://192.168.2.1
When the configuration program is opened for the first time or if the device has been
switched back to the factory settings, the default settings assistant is started (see
page 31).
Otherwise the registration page for entering the password will appear.
ì
Enter the password and click OK.
The default password on delivery is admin.
A page containing security information is displayed.
ì
Click OK.
You will now see the start screen.
Note:
To start the configuration environment, you might need to deactivate the HTTP proxy
for your browser (see page 93).
If you use Mozilla Firefox or if you use Internet Explorer and Windows XP Service
Pack 2, you need to configure the popup blocker (see page 93).
Note:
For security reasons you should change the password at a later stage (see
page 35).