Sony SE366 - Manual (Page 58)

58
Configuring the Advanced Settings
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
You can activate or deactivate the NAT function (default setting: NAT function is
activated).
ì
In the Advanced Settings – Internet menu, select Address Translation (NAT) and
mark the required option.
Port triggering
If you configure port triggering for a certain application, define a so-called trigger port
and the protocol (TCP or UDP) this port uses. You then assign the public ports that have
to be opened for the application to this trigger port.
You can select known Internet services for this or assign ports or blocks of ports
manually.
ì
To set up port triggering for a service, select Port Triggering in the
Address Translation (NAT) menu.
ì
Select the required application from the Predefined applications list.
ì
Click the Add button. The data for the required service is entered on the screen.
ì
Select the option in the Enabled column.
If the application you require is not in the list, you must enter the relevant data on the
screen manually:
ì
Local protocol: Select the protocol that is to be monitored for outgoing traffic.
ì
Local port: Enter the port that is to be monitored for outgoing traffic.
ì
Public protocol: Select the protocol that is to be allowed for incoming data traffic.
ì
Public port: Enter the port that is to be opened for incoming data traffic.
Note:
You can enter a single port number, several individual port numbers separated by
commas, port blocks consisting of two port numbers separated by a hyphen, or
any combination of these, e.g. 80,90-140,180.