Sony SE366 - Manual (Page 65)

65
Configuring the Advanced Settings
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
Assigning static IP addresses to individual PCs
Even if you have activated the DHCP server you can still assign a static IP address to indi-
vidual PCs (e.g. when setting up these PCs for NAT functions).
ì
Enter the MAC address and the name of the PC in the Device name field.
ì
Enter the IP address you wish to assign to the PC in the field below.
ì
Click Add to add the entry to the list.
ì
Click Delete to delete the entry from the list.
ì
Click OK to apply the settings.
Configuration for wireless connections
If PCs communicate wirelessly via the Gigaset SE366 WLAN, you should take steps to
enhance the security of your wireless network. You make this configuration via the
Advanced Settings – Wireless Network menu. Here you can
u activate the Gigaset SE366 WLAN's wireless module (see below),
u set the channel and SSID (see page 66),
u activate and configure WPS (see page 68),
u set Encryption for wireless traffic (see page 69),
u restrict access to the Gigaset SE366 WLAN's LAN (see page 74),
u configure the Gigaset SE366 WLAN's repeater function (see page 75).
ì
In the Advanced Settings menu, select Wireless Network.