Sony SE366 - Manual (Page 68)

68
Configuring the Advanced Settings
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / configure_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
Configuring WPS
Wifi Protected Setup (WPS) makes it easier to establish a wireless network. Devices
equipped with WPS are able to create and synchonise an SSID and a WPA key (pre-shared
key) automatically.
All you need to do to establish a secure wireless connection is press the registration but-
ton and click once in the user interface of the client. For further information, see section
"WPS" on page 13.
ì
In the Wireless Network menu, choose WPS Registration.
ì
Choose the desired Registration Mode:
– Push Button
Click OK to start the WPS registration.
This function corresponds to pressing the Registration button on the device’s
back panel.
After starting the WPS registration, the device searches for a WPS client in range.
Any WPS client in range that activates its WPS function within two minutes gets
the Gigaset SE366 WLAN security data (SSID and pre-shared key) and is thereby
registered.
The registration progress is shown in the window.
You can also follow the registration process via the LED display (see page 19).
– Send own PIN
An automatically generated PIN is shown.
If you want to create a new PIN, click Generate PIN. Please note that any devices
that may be connected with the old PIN no longer have access to the Gigaset
SE366 WLAN.
Click OK to activate your settings.