Sony SE366 User Manual
Page 81
81
Administration and status information
Gigaset SE366 WLAN / englisch / A31008-M1063-R101-4x-7619 / admin_router.fm / 13.11.2008
Sc
hablone 200
4_12
_27
You can start remote administration by entering the public IP address in your Internet
browser. As many Internet providers change this address each time someone dials in, it
is also advisable to use dynamic DNS (see page 61).
ì
You can change the Port via which you access the configuration program from the
Internet, for example in order to hide and protect the configuration program against
unauthorised access.
ì
Define Access (full control) or Access (read only) as the access right for permitted
connections in the Access field.
ì
Allowed connections: You can specify one particular PC or all PCs in a specific IP
address block for Remote Management, or permit this function for any PCs. Select
the required option from the list.
Remote Management for one particular PC:
ì
In the IP address field, enter the IP address of the PC that is to have access to the
user interface of the Gigaset SE366 WLAN from outside your local network.
Remote Management for PCs in a specific IP address block:
ì
In the First IP address and Last IP address fields, enter the IP address block of the
PCs that are to have access to the user interface of the Gigaset SE366 WLAN from
outside your local network.
ì
Click OK to apply the settings.
Note:
If you permit any PCs, then anyone who finds out your password can access this
user interface and therefore also your network! If this option is needed, you
should always only activate it for a short time.
Note:
u
The Internet provider might assign the IP address to the PC dynamically. This
can then change the IP address. Make sure that the PC that is to access the
router from the Internet always has the same IP address.
u
To access the configuration environment via Remote Management, you must
enter the address of the Gigaset SE366 WLAN to be maintained in the follow-
ing format in the browser: http://X.X.X.X:8080 (x.x.x.x stands for the
IP address of the Gigaset SE366 WLAN).