Sony DSR-70 - Manual (Page 52)

Selecting an Edit Mode
Chapter 3
Editing
52
Chapter 3 Editing
Checking Edit Points
You can check the time data of edit points and the duration between two
edit points by displaying them in the sub LCD.
To display the time data of edit points
Press the recorder side or player side IN or OUT button.
While the button remains pressed, the time data for the corresponding edit
point is displayed in the sub LCD.
To display the duration between two edit points
From among the recorder side and player side IN buttons (or AUDIO IN
buttons) and OUT buttons, press two of the buttons together.
The duration appears in the sub LCD while the buttons are kept pressed.
In some cases, negative durations preceded by a minus sign (–) may be
displayed.
The displayed durations are calculated as follows.
When two edit points are set: The duration between the two edit points
When only one edit point is set: The duration between the edit point and
the current tape position
When no edit points are set: The duration of the most recently set edit
points
AUDIO IN
TRIM
LIST MARK CLIP
LINK
ENTRY SHIFT
IN OUT
– +
DELETE
IN button
OUT button
Setting Edit Points