Sony DSR-70 - Manual (Page 106)

Chapter 7
Setup Menu
106
Chapter 7 Setup Menu
Extended Menu Extended Menu
Items in the Extended Menu
The extended menu contains the following items.
In the Settings column of the table, the factory default
settings are underlined.
Item number Item name Settings
101 SELECTION FOR
SEARCH DIAL
ENABLE Select how the unit enters the search mode.
DIAL: Turning the jog or shuttle dial switches to search mode at all times except during
recording/editing.
KEY: The search button must be pressed to switch to search mode.
Menu items in the 100s, relating to the control panels
102 MAXIMUM TAPE
SPEED Specify the maximum tape speed in search mode.
×
85: Maximum 85 times normal (picture invisible)
×
32: Maximum 32 times normal
×
24: Maximum 24 times normal
×
16: Maximum 16 times normal
105 REFERENCE
SYSTEM ALARM Select whether or not to display alarm messages concerning the reference video signal.
ON: Flash the STOP button and display an alarm message.
LIMIT: Flash the STOP button and display an alarm message only either when the unit
is in recording mode or E-E mode or when editing operation is being carried out.
OFF: No alarm messages.
107 REC INHIBIT
LAMP FLASHING Select whether or not to flash the REC INHI indicator when recording is prevented
though the REC INHI switch on the control panel is set to OFF.
OFF: Light the REC INHI indicator.
ON: Flash the REC INHI indicator.
108 AUTO EE
SELECT When a cassette is inserted and the PB/EE item in the sub LCD menu general settings
page is set to PB/EE, select the operation modes in which input video and audio signals
are automatically handled in E-E mode.
S/F/R: In STOP/F FWD (fast-forward)/REW (rewind) modes
STOP: In STOP mode
109 FORCED EE
WHEN TAPE
UNTHREAD During tape threading and unthreading, and when no cassette is inserted, select
whether the PB/EE item of the sub LCD menu general settings page controls the output
signal PB/EE setting.
ON: No control (the signal is always an E-E signal).
OFF: Control.
118 KEY INHIBIT
SWITCH
EFFECTIVE AREA
Sub-item
Select which switches and buttons can be operated when the KEY INH in the sub LCD
menu is set to ON. The following sub-items control different sets of switches and
buttons independently.
REMOTE
SELECT Select whether the REMOTE/LOCAL switch on the control panel is enabled.
DIS: Disabled.
ENA: Enabled.
1
CONTROL
PANEL Select which switches and buttons operations on the control panel are enabled.
DIS: All switches and buttons are disabled.
EDIT: All switches and buttons for editing operations are disabled.
ENA: All switches and buttons are enabled.
2