Sony DSR-70 - Manual (Page 122)

Chapter 8
Connections and Settings
122
Chapter 8 Connections and Settings
Connections for Two-Unit Synchronous Playback
The following shows connections for synchronous
playback using two DSR-70/70P units.
In the following, the controlling unit is referred to as
the recorder and the controlled unit as the player. For information about how to carry out two-unit
synchronous playback, see the section “Two-Unit
Synchronous Playback” on page 89.
REMOTE REMOTE
REF.
VIDEO
OUT REF.
VIDEO
IN
Player settings
Switch/menu Setting
REMOTE/LOCAL switch REMOTE
Recorder settings
Switch/menu Setting
REMOTE/LOCAL switch LOCAL
Setup menu item 004 ON (Synchronize.)
OFF (Do not
synchronize.)
Setup menu item 305
(When synchronizing,
synchronization accuracy) ACCUR (±0 frame)
ROUGH (±1 frame)
REF. VIDEO IN 75
Ω
termination switch
ON
DSR-70/70P (player) DSR-70/70P (recorder)
1
2
1 75 Ω coaxial cable (not supplied)
2 RCC-5G/10G/30G 9-pin remote control
cable (length 5 m (16 ft)/10 m (33 ft)/30 m
(98 ft), not supplied)