Sony DSR-70 - Manual (Page 63)

Chapter 4
Time Data and Sub LCD Menu
Chapter 4 Time Data and Sub LCD Menu
63
5 Operating mode
The ■ mark, indicating an auto editing segment, may
appear at the rightmost position.
The contents displayed other than the ■ mark are
listed below.
a) “+2.0” in the left box is an example of playback speed
indication.
Setting an Initial Value and
Recording Timecode
Set the switches and sub LCD menu items as shown
below.
Sub LCD menu settings
Item Setting
F-RUN/R-RUN Desired setting
DF/NDF Desired setting
(general settings page) (for DSR-70)
To set an initial timecode value
Perform the following procedure.
1
Press the COUNTER SELECT button and select
TC.
ON
OFF
LOCAL
REMOTE
INT
EXT
TC CHARACTER
TC INT/EXT: INT
1
3,5
3,4,5,6
7
2
MENU SET
RESET button
Display Operating Mode
CASSETTE OUT No cassette loaded
TAPE UNTHREAD Tape not yet threaded
STANDBY OFF Standby off mode
T. RELEASE Tension release mode
STOP Stop mode
F. FWD Fast forward mode
REW Rewind mode
PREROLL Preroll mode
PLAY Playback mode (servo unlock)
PLAY LOCK Playback mode (servo lock)
REC Recording mode (servo unlock)
REC LOCK Recording mode (servo lock)
SEQ-REC Sequential recording mode
(servo unlock)
SEQ-REC LOCK Sequential recording mode
(servo lock)
EDIT Editing mode (servo unlock)
EDIT LOCK Editing mode (servo lock)
JOG STILL Jog mode still playback
JOG FWD Forward jog
JOG REV Reverse jog
SHUTTLE +2.0 Shuttle mode (playback speed) a)
PREVIEW Preview mode
AUTO EDIT Auto edit mode
REVIEW Review mode
(Continued)