Suburban Mfg OXYGEN THERAPY DOOR 12155-00-DRDRAA - Manual (Page 29)

Form No. 702703 Rev. E August, 2006 25
Owner’s Manual - Oxygen Therapy Door
Hang the new ice tray on the button hooks provided on the door
(Figures 27 and 28).
Ice Tray Valve
Ice Tray
Tools Required
„
Pliers
„ Utility knife
Procedure
1.
Remove the ice tray from the oxygen therapy door.
2. If tubing is attached to the valve barb fitting, pull or cut
it off.
3. Holding the valve body with a pliers, unscrew the valve
from the tray.
4. Screw the new valve into the tray.
5. Reattach any tubing that was connected to the old valve.
6. Hang the ice tray on the oxygen therapy door.
P/N 854545
P/N 202975
Figure 27. Ice Tray Button Hooks
Ice Tray
Button Hooks
Figure 28. Ice Tray in Place
Ice Tray