Chapter 5 - troubleshooting, General – Suburban Mfg OXYGEN THERAPY DOOR 12155-00-DRDRAA User Manual

Page 33

Advertising
background image

Form No. 702703 Rev. E August, 2006

29

Owner’s Manual - Oxygen Therapy Door

General

The following procedures will help you fix most of the problems that
you might encounter with the Oxygen Therapy Door. If necessary,
please feel free to call SSCI Customer Service at (800) 323-7366.
Our experienced Technical Support personnel will be glad to help you.

For more information on contacting SSCI, refer to SSCI Contact
Information
on Page 5.

Part numbers for available replacement parts are shown in Table 2
on Page 17. To order replacement parts, refer to Parts Ordering
Procedure
on Page 18.

Possible problems are listed below along with their page references:

„

There is no oxygen flow into the cage.-----------------------------------------------Page 31

„

„

„

„

„

There is excessive oxygen leakage from the cage. ------------------------------Page 32

„

The door does not close or latch correctly.-----------------------------------------Page 33

„

„

„

„

„

One or both of the gauges does not read correctly. -----------------------------Page 34

Page numbers shown in the Remedial Action sections direct you to
step-by-step directions on replacing specific parts. Refer to
Chapter 4, Repairs and Replacements.

If your oxygen therapy door must be returned to SSCI for repairs,
refer to Returning the Oxygen Therapy Door for Repairs on
Page 30 for directions.

Warning: Oxygen is a highly combustible gas. Avoid the use of open

flames, smoking materials, or equipment capable of producing sparks

in any area in which oxygen is being used.

Before servicing or performing maintenance on the oxygen therapy

door, make sure the oxygen supply is turned off at the source.

Chapter 5 - Troubleshooting

Advertising