Hookup 4: vcr plus+ channel setup, Automatic clock setting, Hookup 4: vcr setup – Sony DHR-1000 User Manual

Page 21

Advertising
background image

21

Getting Started

Hookup 4: VCR Plus+ channel setup

1

Find the VCR Plus+ Channel Listing in your
program guide. For details on the VCR Plus+
Channel Listing, see page 36.

2

Enter all the channels you want to record and the
cable box output channel (usually 2, 3, or 4):

Note

• You have to set the channel manually on the cable box for each

recording.

Automatic clock setting

To use the Auto Clock Set feature with this hookup,
you need to manually select a channel that carries a
time signal:

1

Tune the cable box to a channel that carries a time
signal.

2

Select AUTO in the CLOCK SET menu to turn on
the Auto Clock Set feature.

3

Turn off the VCR.
It automatically sets the clock and adjusts for
Daylight Saving Time by picking up the time
signal.

If you want to use the timer to record right away, or if
the channels in your area do not carry time signals, set
the clock manually. For details, see pages 2729.

Note

• To use the automatic clock setting feature, leave the cable box

on.

• Depending on your area, the automatic clock setting feature

may not set the clock correctly. In this case, set the clock
manually according to the procedure on page 29.

Hookup 4: VCR setup

1

Set the RF UNIT switch to CH 3 or CH 4, whichever
channel is not used in your area. If both are used,
set the switch to either channel.
If you made A/V connections (from page 12), you
can skip this step.

2

Turn on your cable box.

3

Press EASY SET UP on the VCR.
The SET UP menu appears.

1 The CLOCK SET menu

appears. Select MANUAL
and press EXECUTE.
For details, see page 27.

For details, see page 92.

Normal display ?

4 The AUTO PRESET starts.

For details, see page 30.

3 The TUNER PRESET menu

appears. Set ANTENNA/
CABLE to ANT and press
EXECUTE.
For details, see page 30.

2 The CABLE BOX menu

appears. Set CABLE BOX
CONTROL to OFF and
press EXECUTE.
For details, see page 33.

Press MENU and select

SET VCR Plus+
CHANNELS.

Enter the program guide

channel, then the cable

box output channel.

Program guide channel

Your cable box channel

Press EXECUTE.

For details, see page 37.

04/08-26_DHR-1000.13E

01.4.26, 2:10 PM

21

Black

Advertising