Sony DHR-1000 - Manual (Page 79)

Editing 79
Editing without LANC cable
Copying a tape
You can copy a whole tape to the other tape.
Before editing, set up the system according to the instructions on pages
77 to 78.
1
Search for the points where you
want to start playing or
recording, and set both VCRs to
stop.
2
Press r REC on this VCR while
holding down P PAUSE.
This VCR is set to recording pause.
3
Search for the point to start
playback on the other VCR, and
set it to playback pause.
For best results, pause the tape a few
seconds before the beginning of the
scene.
4
Press the pause button on the
other VCR to start playback. At
the beginning of the scene you
want to record, press P PAUSE on
this VCR to start recording.
To stop copying
Press p STOP on this VCR and the other VCR.
Note
•
If you start recording as
soon as playback starts, the
first few seconds of the
picture and/or sound may
become distorted.
r REC
P PAUSE