Sony DHR-1000 - Manual (Page 67)

Editing 67
With this function, the tapes in both VCRs are rewound to the
beginning, then the source tape is copied until one of the tapes reaches
its end. If you want to start copying from the middle of the tape, see
page 68.
Before you start editing, set up the system according to the instructions
on pages 64 to 66.
1
Press DUPLICATE ENTIRE TAPE.
The indicator lights up.
To cancel copying, press DUPLICATE
ENTIRE TAPE again.
2
Press START/PAUSE.
Both tapes are rewound to the
beginning. The source tape starts
playing, and a few seconds later, this
VCR starts recording.
When either tape reaches its end, both
tapes stop.
To stop copying
To stop while copying, press p (STOP).
Editing with LANC cable
Copying a tape
Note
• The first few seconds may
not be recorded.
START/PAUSE
DUPLICATE
ENTIRE TAPE
p (STOP)