Sony DHR-1000 - Manual (Page 40)

40 Basic Operations
Recording TV
programs using VCR
Plus+
Just enter the program’s “PlusCode” listed in the TV program guide.
The date, times and channel of that program are set automatically. You
can preset up to eight programs at a time.
Before you start...
• Check that the clock is set to the correct time.
• Insert a tape with its protect tab not slid to red. Make sure the tape is
longer than the total recording time.
• Turn on your TV and set it to the video channel.
1
Slide down the back cover of the
remote commander, then press
VCR Plus+.
2
Press the PlusCode number
buttons to enter the program’s
PlusCode.
If you make a mistake, press TIMER
CLEAR and enter the correct PlusCode.
3
Press ONCE, DAILY, or WEEKLY:
To record Press
Only once ONCE
Everyday Monday to Friday DAILY
Once a week WEEKLY
The date, start and stop times, and
channel number appear on the screen.
Check that the information is correct.
If it is not, press TIMER CLEAR to
cancel.
4
To preset another timer setting,
repeat steps 1 to 4.
5
Press POWER to turn off the VCR.
“TIMER” appears in the display
window and the VCR stands by for
recording. When using a cable box,
leave it on.
POWER
Notes
• You cannot set a PlusCode
in the following cases:
– When the VCR is turned
off.
– While recording using the
timer or quick timer
• The timer will not accept
settings in the following
cases:
– When you select DAILY
for a Saturday or Sunday
program.
– When you select DAILY
or WEEKLY for a
program more than seven
days ahead.
– When you enter PlusCode
of a program that has
already ended.
VCR Plus+
TIMER
CLEAR
WEEKLY
DAILY
ONCE
PlusCode
number
button