4a: connecting the audio components, How to hook up your components – Sony R-DG1200 User Manual

Page 18

Advertising
background image

18

US

D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01US-
STRDG1200CEL\030CON.fm

masterpage: Left

STR-DG1200

3-289-135-11(1)

Notes

• Be sure to turn on the receiver when the video and

audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.

• Depending on the status of the connection between

the TV and the antenna, the image on the TV
screen may be distorted. In this case, place the
antenna farther away from the receiver.

• When connecting optical digital cords, insert the

plugs straight in until they click into place.

• Do not bend or tie optical digital cords.

Tips

• The receiver has a video conversion function. For

details, see “Notes on converting video signals”
(page 31)
.

• The sound of the TV is output from the speakers

connected to the receiver if you connect the audio
output jack of the TV and the TV IN jacks of the
receiver. In this configuration, set the audio output
jack of the TV to “Fixed” if it can be switched
between either “Fixed” or “Variable”.

• The screen saver is activated when the GUI menu

is displayed on the TV screen and there has been no
operation attempted for 15 minutes.

• All the digital audio jacks are compatible with

32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.

4a: Connecting the audio
components

This section describes how to hook up your
components to this receiver. Before you begin,
see “Component to be connected” below for
the pages which describe how to connect each
component. Before connecting the cords, be
sure to disconnect the AC power cord.
After hooking up all your components,
proceed to “5: Connecting the antennas”
(page 33)
.

Notes

• When connecting optical digital cords, insert the

plugs straight in until they click into place.

• Do not bend or tie optical digital cords.

Tip

All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.

How to hook up your
components

Component to be connected

Page

Super Audio CD
player, CD player

With digital audio
output

19

With multi channel
audio output

21

With analog audio
output only

22

MD deck

With digital audio
output

19

With analog audio
output only

22

Tape deck, Analog disc turntable

22

DIGITAL MEDIA PORT adapter

19

Advertising
This manual is related to the following products: