Sony R-DG1200 - Manual (Page 27)

27 US
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01US-
STRDG1200CEL\030CON.fm masterpage: Right
STR-DG1200
3-289-135-11(1)
Getting Star
ted
The following illustration shows how to
connect a Blu-ray disc player.
It is not necessary to connect all the cords.
Connect the audio and video cords according
to the jacks of your components.
Note
To input multi channel digital audio from the Blu-
ray disc player, set the digital audio output setting on
the Blu-ray disc player. Refer to the operating
instructions supplied with the Blu-ray disc player.
* When you connect a component equipped with an
OPTICAL jack, set “Input Assign” in the Input
menu.
Tip
The COMPONENT VIDEO COMPO 1 IN jacks
have been assigned to the Blu-ray disc player. If you
connect your Blu-ray disc player to the
COMPONENT VIDEO COMPO 2 or COMPO 3 IN
jacks, set “Input Assign” in the Input menu.
Connecting a Blu-ray disc player
Blu-ray disc player
A B C
A Optical digital cord (not supplied)
B Coaxial digital cord (not supplied)
C Audio cord (not supplied)
D Video cord (not supplied)
E Component video cord (not supplied)
D
Audio signals Video signals
E