Sony R-DG1200 - Manual (Page 13)

13 US
D:\NORMAN_PC\JOBS\SONY HA\STR-DG1200\U\3289135111\01US-
STRDG1200CEL\030CON.fm masterpage: Right
STR-DG1200
3-289-135-11(1)
Getting Star
ted
a)
See the table on page 114 for information on the
buttons that you can use to control each
component.
b)
The TV/5, N/CATEGORY MODE and PRESET
+/TV CH + buttons have tactile dots. Use the
tactile dots as references when operating the
receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
1: Installing the speakers
This receiver allows you to use a 7.1 channel
system (7 speakers and one subwoofer).
To fully enjoy theater-like multi channel
surround sound requires five speakers (two
front speakers, a center speaker, and two
surround speakers) and a subwoofer (5.1
channel system).
Example of a 5.1 channel
speaker system configuration
AFront speaker (left)
BFront speaker (right)
CCenter speaker
DSurround speaker (left)
ESurround speaker (right)
HSubwoofer
W SHIFT Press to light up the button to
activate the buttons with pink
printing.
X TV Press to light up the button to
enable TV operation (buttons
with yellow printing).
Y THEATER Press to enjoy optimal image
suited for movies and to output
the sound from the speakers
connected to this receiver
automatically.
Note
This button will only function if
your TV is compatible with
Theater Mode.
Refer to the operating
instructions supplied with the
TV for details.
Z RM SET UP Press to set up the remote.
Name Function
Enjoying a 5.1/7.1 channel
system
continued