SmartBridges airPoint Pro Series User Manual
Page 16
Advertising
Revision 1.8
Page 16 of 28
4. SECURITY TAB
The airPoint-PRO can operate in four different Modes, namely
By default encryption is disabled which means the communication is not secure.
In case you want to have a secure communication, ensure that the WEP
encryption keys are set.
To set the encryption keys click on security tab:
-
Select the Desired Encryption Key (64Bit/128Bit).
-
Enter HEX data (0~9, A~F) as this is the default settings.
-
Select the desired key to be used (Default Key).
-
Save the WEP Keys....
-
You will get a pop up window with the message 'WEP Encryption Keys Saved
Successfully'.
Advertising