SmartBridges airPoint Pro Series User Manual
Page 9
s m a r t
Bridges
to the future ...
Revision 1.8
Page 9 of 28
Connecting the airPoint-PRO series using Power Over Ethernet:
The airPoint-PRO series is powered through the ethernet cable itself. This mode of
operation gives flexibility for the user to position the airPoint-PRO at any location for best
radio coverage.
Connect one end of the power cord to the powerShot and the other end in the power
socket.
Connect the RJ45 cable to network / PC.
Connect the RJ45 cable between the powerShot and airPoint-PRO Outdoor / airPoint-
PRO TOTAL. This cable will provide both ethernet signals and power.
Cross coupler switch in SB2820 powerShot selects straight or crossed ethernet
connection.
For cable lengths in excess of 50 meters it is recommended that the AC adapter should
be of 18 Volt type. Normally 12 V AC adapter is provided with the airPoint-PRO.