SmartBridges airPoint Pro Series - Manual (Page 21)

Revision 1.8 Page 21 of 28
External Radius Server Authorization
To authorize clients using the External Radius Server please key in the following parameters and
Click on Set Parameters button.
Source Port (Default Port is 1812)
Destination Port (supported in F/W 1.4.j.7 onwards)
Radius Server IP Address
Secret Key
Reauthorization Time in minutes ( 0 to 65535 )
If you set the Reauthorization Time as 0 minutes, then reauthorization mechanism is disabled, else
all the associated clients will be reauthorized with the Radius Server after the Reauthorization Time.
Please refer to Application note for Radius Server Setup and usage with airPoint-PRO for more
details.